Disc Brake Conversion How to convert your car from from drum brakes to disc brakes. This video shows you step by step how to remove your old drum brake system, then replace it with a new modern disc brake system. You will learn how to disassemble your old drum brakes safely and quickly. The parts you will need to do the conversion. Some vehicles can be done with a complete disc brake conversion kit. I show you how to get a kit made for your vehicle if one is not available. I will walk you thru the entire process on a step by step basis. You'll learn how to attatch brackets required. What hardware to use. What is a castle nut and why we use them. How to "pack" wheel bearings with grease. Both by hand and with a tool. How to assemble the bearing and rotor/seal assembly. How to properly adjust wheel bearings so they are not loose or too tight. How to assemble the brake caliper/pads for installation. What is a Banjo Bolt and how to install them. Plus tips and tricks all along the way to make your Disc Brake Conversion go quickly and easly. Thank you for tuning in. Please Like & Subscribe Comments and encouraged and appreciated Thanks again, Troy Kane
Read More